Attachment of the set legs – Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ATTACHMENT OF THE SET LEGS

Attachment of the Set Legs

The power supply may be installed either horizontal or vertical. These are 2 sets of mounting holes for the set legs, and

an extra set of legs supplied with the unit. If it is desired to install the power supply in the vertical position, insert the extra
legs as shown.

m Insert the set legs [TMK83908-2] to the four holes located on the right side of the power supply.

Set legs [TMK83908-2]

2 Press down hard on the button on the upper part

of the set leg.

_ 4 _