Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 - Manual (Page 17)

Press t I nter I. wait 5 seconds press I ENTER I again.
4 . Limits
5. Feed
Press t PRG I .
Set up menu is again displayed. (See [Fig. l])
Press I 2 I Select Dual Feed. Display will show as [Fig. 4].
Press I 1 I for C Band or Ku Band single feed or C Band/Ku Band dual band feed.
[ 2 I for C Band or Ku Band dual feed (H & V).
6. Satellite
Select satellite by pressing I SAT | I NUMBER BUTTONS ] (LETTER)
I NUMBER BUTTONS I (NO.)
• This will automatically set the channel/polarity format for that satellite,
7. Skew
When the satellite is recognized adjust the skew using the I ^ I I >~| buttons on
an even channel.
The word SKEW will be displayed on the screen during the adjustment, SKEW flashes
until the skew limit is reached and the indication stops flashing. Repeat the skew
adjustment for an odd channel.
8. Format
If necessary on a Ku Band satellite, set polarity for each channel by using / V I
button on remote controller while tuning each channel.
9. Program
When all adjustments above are completed press I ^TER~| to enter all settings into
memory.
10. Operate
Press rPR5 3 □□ “SET UP END” to go back to normal operation.
- 1 6 -