Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 - Manual (Page 14)

ON-SCREEN DISPLAYS
The CRD-4500 generates a variety of on-screen informational displays. The full display indicates your current satellite,
channel & favorite channel, polarity, antenna position, audio volume level, and more. This information appears automatically
whenever you make any changes or adjustments. You can also check your setting at any time by pressing the I DISPLAY |
button on the remote controller.
\T] Normal on-screen display ___________
• When the equipment is turned on and the I DISPLAY“"] button on the remote controller is depressed, the following
data will be displayed on TV or the monitor screen connected to the equipment.
On-Screen Display’s basic formation
(T) Mode
CD Satellite ■
(D Channel
® V/H select
CD AFC ON/OFF
CD Volume
CD Audio subcarrier
Surround
>. . .. . I ^7—71^
-CD Satellite name/No.
Ku/C Band select
Favorite page/No.
® Antenna position
® VC ON/OFF
@ Audio bandwidth
• Data input choices for the ordinary operation
No. PARAMETER DATA INPUT CHOICES No. PARAMETER DATA INPUT CHOICES
® Mode Set up or blank ®
Satellite
name/No. name
No. -1-9
Satellite
Automatically appears by
satellite name CD- (‘D
KU/C Band
select
Ku BAND or C BAND
Channel
Cband-CH1~CH24
Ku band -CHI-CH32
Favorite
page/No.
18 CHs. FAV1-1-FAV1-9,
FAV2-1-FAV2-9 (*2)
V/H select VERT or HOR
Antenna
position
0000-9999
AFC ON/OFF ON or OFF VC ON/OFF ON or OFF (’3)
Volume 1—16 bars ©
Audio
bandwidth
WIDE or NARROW
®
Audio
subcarrier
5.20-8.60 MHz Surround “S" or blank
Note: *1 Displays name of pre-stored satellite.
*2 ” Displays when program received has been stored in Favorite Channel memory.
*3— Displays only when the VideoCipher II signal is being received.
- 1 3 -