Introduction, Important safety notice, Caution – Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INTRODUCTION
DEAR PANASONIC CUSTOMER
Congratulation on your purchase of a new Panasonic CRD-4500 Integrated Satellite Receiver/Positioner/Descrambler, It
represents the state-of-the-art in television viewing. CRD-4500 is an integrated satellite receiver/positioner/descrambler com
posed of a receiver unit [CRD-4500R]; a power supply [CRD-4500P]; a remote controller [RMC-4500]: and a built-in descram
bler [VideoCipher n ].
* See page 23.
IMPORTANT SAFETY NOTICE
WARNING:
To prevent damage which may result in fire or shock hazard, do not expose this appiiance to rain or moisture.
WARNING:
Remove plug from wall outlet when the unit is not in use for a prolonged period of time.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsu
lated “dangerous voltage” within the pro
duct’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main
tenance (servicing) instructions in the liter
ature accompanying the appliance.
“This equipment has been tested and found to comply with the limits for a Class B computing device in accordance with the
specifications set forth in Subpart J of Part 15 of the FCC Rules. If this equipment does cause interference to radio or
television reception which can be determined by turning the equipment on and off, use the equipment in another location
and/or utilize an electrical outlet different from that used by the receiver."
To comply with FCC rules regarding emission limits, shielded cables must be used when connecting this device
to other equipment.
CAUTION:
Do not remove the grounding pin on the power plug.
This equipment is equipped with a three grounding-type power plug. This plug will only fit a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Do not remove
- 1 -