T| i – Panasonic VideoCipher II Integrated Satellite Receiver/Positioner/Descrambler CRD-4500 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[ Т ] I EXT. ANTENNA AND TV OUT TERMINAL

• To receive an ordinary TV broadcast, turn the

receiver OFF.

• The CRD-4500R has a built-in RF modulator

with RF output (TV OUT) on either Channel 3

or 4. Unless a monitor is used, the RF output
will normally connect to the TV set.

VHF Antenna

•X-

To Ant. terminal

of TV set.'

[T| I

AUDIOA/IDEO OUTPUT TERMINAL

• The receiver audio out and video out terminals may be used at the same time as the RF output (TV OUT).

Note:

The audio to a monaural monitor can be connected to either the R or L audio output terminal.

[T| I

COMPOSITE OUT TERMINAL

• In case of connecting a descrambler other than VideoCipher H, connect it to the composite out terminal.