Press tape, Q press ^ open on both decks and insert the tapes, Press rev mode to select the reverse mode – Panasonic SC-AK25 User Manual
Page 24: Press tape edit to start recording, Recording, Tape-l'o-tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape-l'o-tape
recording
The recording level and the Dolby effect will be recorded as they are
on the tape being played back.
Press TAPE.
Q Press ^ OPEN on both decks and insert the
tapes.
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to
Press REV MODE to select the reverse mode.
Every time you press the button;
One side is recorded, then recording stops auto
matically.
•
7
*
1
, C
7
ID: Both sides {front side-^reverse side) are recorded,
then recording stops automatically.
Press TAPE EDIT to start recording.
• If you selected in step 3, the direction will automatically
change to when recording starts.
To stop recording:
Press
M.
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1, Press TAPE DECK 1/2 and select tape deck 2.
2. Press and immediately thereafter ■. The tape direction will be
shown as
To record from a specific point on a tape
Before recording, advance the tape to the point from where you
want to start recording.