Panasonic SC-AK25 - Manual (Page 22)

Recording from compact discs
C
.0
s
0)
%■
O)
.C
"S
o
DECK 2
Tape direction
[ D0LBYj;iH
2
□□NR
o _ o
r" T?
/■ in 71 T <“ 1“
»'!(_( ^ J. t_
©
Press DECK 2 ^ OPEN, and then insert the
tape.
Close the holder by hand.
Tape direction is automatically set to
lExcept Se?AK25iiTiddel’fpr AustraliaiandlN
Press DOLBY NR.
You have to turn Dolby NR ON/OFF according to the type of
recording you want to make.
Every time you press the button: □□ NR^(OFF)
Press REV MODE to select the reverse mode.
Every time you press the button;
T
~:Z.- One side is recorded, then recording stops auto­
matically.
c^y. Both sides (front side^reverse side) are recorded,
then recording stops automatically.
71 Press CD.
Load CDs into each of the trays.
(See page 13.)
Press DISC 1-DISC 5 to select the disc you
want.
Pressing K will stop playback.
Press 9 REC/STOP to start recording.
«If you selected c:^D in step 3, the direction will automatically
change to when recording starts.
•The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final disc
(page 14).
«The tape deck stops automatically when the CD is finished.
To stop recording
•To add a 4 second silent interval before stopping.
Press ■. The CD will stop automatically too.
•To stop recording without a silent interval.
Press 9 REC/STOP. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1. Press TAPE DECK 1/2 and select tape deck 2.
2. Press and immediately thereafter ■. The tape direction will be
shown as
To record from a specific point on a tape
Before recording, advance the tape to the point from where you
want to start recording.
r 1 n - n 1
s ■
To record progrommed tracks
njMEMODE
1. After step 5, program the track you want (performs steps 2-6 on
page 16.)
2. Press • REC/STOP to start recording.
a
<” t u o - c o
_ l i _i f (_(■_/ t_
loEl 2(113
( t h i i I
( LJ'U I