Panasonic SC-AK25 - Manual (Page 18)

Usfenihg to tapes
Type of tape which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE 1 0
HIGH POSITIONATYPE II 0
METAL POSiTION/TYPE IV 0
You can use either deck 1 or deck 2 for tape playback.
Press TAPE.
The power will come on automatically,
g Press DECK 1 a OPEN or DECK 2 A OPEN
and insert the tape.
insert the tape with the exposed tape facing down.
Close the holder by hand.
; ptcept SGrAK2K mode! ¡for Austra I la and: NewZealand;
Press DOLBY NR.
You have to turn DOLBY NR ON/OFF according to the type of
recording you made.
Every time you press the button; □□ NR->(OFF)
t_ _ _ _ _ _ _ _ I
Press REV MODE to select the reverse mode.
Every time you press the button;
X: One side is played, then playback stops automatically.
'^y. Both sides {front side^reverse side) are played one
time each, then playback stops automatically,
c:^y. Both sides are played 8 times each, then playback stops
automatically.
Press or to start playback.
►: The forward side (front side) will play.
◄; The reverse side wilt play.
Adjust the volume level.
To stop tape playback
Press ■.
To change the deck to be used El
Press TAPE DECK 1/2 to select the deck you want to use when you
load cassettes into both decks.
To Usten to 2 tapes consecutively
Load a tape into each deck and select c :^: d . Both tapes will be
played 8 times each.
13'SIBi
Playback is interrupted while playing back tapes, if you open the
other deck.