Panasonic SC-AK25 - Manual (Page 20)

c
.9
«■
z
I
0>
I
I
et
m
n i~
I f > >— (_( _ u
Before recording (Deck 2 only)
Types of topes which con be recorded
correctly
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I O
HIGHPOSITION/TYPEII O
METAL POSITION/TYPE iV X
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape E!
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quolity/field and super
woofer affect recording
The tape you are recording is not affected whatsoever by changes
in volume, sound quality/field or super woofer.
• In recording, sound quality/field are set automatically to “FLAT’,
•You can change volume and super woofer effect for the playback
sound.
To erase a recorded sound E]
Press TAPE.
insert the recorded tape into deck 2.
Except-SCr'AK25 model for Australia and NewZealand
Press DOLBY NR so that the Dolby NR indica­
tor goes off,
^ Press REV MODE to select reverse mode.
Press m REC/STOP.
•You cannot open deck 1 while recording.
•You cannot fast-forward or rewind one deck while recording with
the other.
Your attention is drawn to the fact that recording pre­
recorded tapes or discs or other published or broadcast ma­
terial may infringe copyright laws.