Switch on the power, Press clock/timer to select “clock, Press v or a to show the present time – Panasonic SC-AK25 User Manual
Page 10: Press clock/timer to finish setting the time, Demd, Function m
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Demd
function m
T) C
«‘I
n
JL.> U > I U
When the demo function is activated, a demonstration of the spec
trum analyzer using space travel images is shown on the display
panel.
Turning the demo function ON/OFF
Press POWER and hold down DISPLAY/DEMO.
Every time you hold down the button;
DEMO (ON)-
-NO DEMO (OFF)
When the demo function is ON, the demo is played automatically in
the following cases.
9
When the system is ON
If the input source is set to CD or tape, and the system is left on
standby for more than
2
minutes
• When the system is OFF
If the clock has not been set
Setting the time
m
This is a 24-hour display clock.
This example in the figure shows how to set the time for 16:25
(4:25 p.m.).
Switch on the power.
Press CLOCK/TIMER to select “CLOCK”.
Every time you press the button;
CLOCKS© PLAY-^0 REC
—Previous display ------------1
(within 7 seconds or so)
Press V or A to show the present time.
Press CLOCK/TIMER to finish setting the time.
The display will return to whatever was displayed before you
set the time.
CLOCKmMER
I n r~
L,
I- U U I '
_
n.n n
_
^
U'U u ^
To display the time when power is ON
Press CLOCK/TIMER to select "CLOCK".
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.