Panasonic SC-CH31 - Manual (Page 60)

Technical Specifications
■ Amplifier section
1 kHz continuous power output
both channels driven
MPO
PMPO
Total harmonic distortion
half power at 1 kHz
(For Australia and New Zealand:
Frequency response
AUX
(For Australia and New Zealand;
Input sensitivity
AUX
Input impedance
AUX
(For Australia and New Zealand:
Graphic equalizer
(100 Hz, 330
Load Impedance
■ FM tuner section
Frequency range
Sensitivity
S/N 26 dB
Total harmonic distortion
MONO
STEREO
S/N
MONO
Frequency response
Image rejection at 98 MHz
(For Australia and New Zealand:)
Stereo separation at 1 kHz
Antenna terminal(s)
2x20W(THD1%,6Q)
2x150W(THD10%,60)
300W(THD10%,60)
0.1% (60)
:) 0.07% (60)
30 Hz-20 kHz(-3dB)
) 30 Hz-30 kHz (-3 dB)
250 mV
22 kO
) 24 kO
±10dB
Hz, 1 kHz, 3.3 kHz, 10 kHz)
60
87.50-108.00 MHz
23.3 dBf (4.0 pV, IHF’ 58)
5.0 m V (40 kHz mod., 60)
0.3%
0.5%
65 dB
30 Hz-15 kHz (+0.5 dB, -2 dB)
35 dB
40 dB
35 dB
750 (unbalanced)
■ AM tuner section
Frequency range
MW
SW1
SW2
(For Australia and New Zealand:)
MW
LW
Sensitivity (for 500 mW)
MW (at 990 kHz, 1000 kHz)
SW1(at4MHz)
SW 2 (at 12 MHz)
(For Australia and New Zealand:)
MW (at 999 kHz)
LW (at 252 kHz)
531 -1602 kHz (9 kHz-steps)
530-1600 kHz (10 kHz-steps)
3.2-7.300 MHz
9.5-21.850 MHz
522-1611 kHz
144-288 kHz
250 pV/m
12.6 pV
40 pV
250 pV/m
350 pV/m
■ Cassette deck section
Track system
Heads
Playback
Record/Playback
Erasure
Motor
Recording system
Erase system
Tape speed
Frequency response
NORMAL
CrOi
S/N (CrOi type tape)
(For Australia and New Zealand only;)
Dolby NR off
Dolby NR on
Wow and Flutter
Fast forward and rewind time
Approx. 110 seconds with C-60 cassette tape
4-track, 2-channel
Solid permalloy
Solid permalloy
Double gap ferrite head
DC servo motor
AC bias, 100 kHz
AC erase, 100 kHz
4.8 cm/sec.
40 Hz-14 kHz (+3, -6dB)
40 Hz-14 kHz (+3, -6dB)
52 dB (A-WTD)
61 dB (CCIR)
0.1% (WRMS)
■ CD player section
Sampling frequency
Decoding
Beam Source/wave length
Number of channels
Frequency response
S/N
Wow and Flutter
Digital filter
D/A converter
■ Speaker system
Type
Speakerfs)
Impedance
Input power
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD)
Weight
44.1 kHz
16-bit linear
Semiconductor laser/780 nm
2-channel, stereo
20 Hz-20 kHz (+1, -2dB)
90 dB Filter (JIS. A)
Below measurable limit
4 times over sampling
Multi-stage noise shaping
2 way, 2 speakers bass-reflex
Woofer 13 cm cone type
Tweeter 5 cm cone type
6Q
50 W (music), 25 W (DIN)
87 dBAV (1.0 m)
3 kHz
50 Hz-22 kHz(-l6dB)
60 Hz-20 kHz(-IOdB)
180x319x250 mm
3.3 kg
■ General
Power consumption 120 W
(For Australia and New Zealand;) 95 W
Power supply AC 50/60 Hz, 110 V/127 V/220 V/240 V
(For Australia and New Zealand:) AC 50 Hz, 230-240 V
Dimensions (WxHxD) 215x319x338 mm
Weight 6.9 kg
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
MASH is a trademark of NTT.