Panasonic SC-CH31 - Manual (Page 52)

Using the Tinner
(continued)
■ To change the time remaining on the sleep
timer
1
Press SLEEP.
Within 5 seconds, follow with the next operation, or the display
will return to what was previously indicated.
2
Turn the jog dial to set the desired time.
m To cancel the sleep timer mode
Press the power switch to put the system In
standby mode or press SLEEP twice.
■ To use the sleep timer in conjunction with the
timer play or timer recording operation
For example, to go to sleep listening to a radio broadcast, and
wake up the next morning listening to a compact disc.
1) Set the ON lime and OFF time for the timer play.
(See steps 1 to 11 on page 46.)
2) Prepare for the play of a compact disc, and set the volume level
for the timer play.
3) Press PLAY TIMER. This will switch the system to the standby
mode.
4) Press SLEEP and set the desired time for the sleep timer.
This will switch the power on, and the sleep timer indicator will
light.
5) Tune in your desired band and station, and adjust the volume
level.
For example, to go to sleep listening to a compact disc, and
then to make a timer recording from a radio broadcast.
1) Set the ON time and OFF time for the tinter recording.
(See page 49.)
2) Select the desired band.
3) Load a cassette for recording in deck 2.
4) Press REC TIMER.
5) Press SLEEP and set the time for the sleep timer.
(Be sure to set the sleep time to be off before the timer recording
starts.)
6) Play the compact disc and adjust the volume level.
When the timer play or the timer recording setting overlaps with the
sleep timer setting, №e sleep timer setting has higher priority.