Panasonic SC-CH31 - Manual (Page 33)

Listening to two tapes consecutively
(Steps 5 and 6 also available from the remote control.)
4 3 2
1
Press the TAPE input select button.
2
Load cassettes in decks 1 and 2.
Load with the side that you wish to listen to first facing you in
deck 1.
3
Press REVERSE iMODE to set the C^D
mode.
(For Australia and New Zealand only:)
4
Press DOLBY NR If the cassette you want to
play was recorded with Dolby noise re­
duction.
The Dolby NR indicator will appear on the display when Dolby
NR is on.
5
Press DECK 1/2 to select deck 1.
The deck 1 indicator will appear.
6 Press the forward-side playback (>) button to
start playback.
The two tapes will play back as follows:
Forward ^
side of tape
in deck 1 > Reverse ^
side of tape
in deck 1 > Forward ^
side of tape
in deck 2 y Reverse
side of tape
in deck 2
■ To stop the tape midway
Press the stop button.
•You can also start playback from a position other than the forward
side of the tape in deck 1 by pressing the opposite playback
button.
•When you load cassettes in both decks, the deck 1/2 Indicator wilt
show which deck you loaded last.
When you switch on the power, the deck 1 indicator wlU always
appear.
33