Panasonic SC-CH31 - Manual (Page 32)

Listening to Tapes
(continued)
■ To stop playback
(Also available from the remote control.)
Proas the stop button.
■ Full auto-stop
When the tape reaches the end, the tape transport will automati­
cally slop. However, if you have set the reverse mode select button
to CI!D in the playback mode, the auto-stop function wilt not
operate.
m About the Dolby Noise Reduction system
(For Australia and Now Zealand only)
Using Dolby NR reduces tape hiss in the high-frequency range, it
boosts the levei of the high-frequency program content during
recording, and lowers it by the same amount during playback,
simultaneously reducing high-frequency noise incurred during the
recording process.
This system has the Dolby B-type of noise-reduction system. With
Dolby B, noise is reduced to about one-third. If you are playing a
tape that was recorded with Dolby NR, use the Dolby NR mode
during playback.
Dolby noise reduction manufactured under iicense from
Dolby Laboratories Licensing Corporation.
“DOLBY" and the double-D symbol □□ are trademarks of
Dolby Laboratories Licensing Corporation.