Panasonic NV-HD100EA - Manual (Page 32)

Recording wiU not Operate correctly
SYMPTOM CAUSE ' ■ REMEDY ■ CHECKED
“EEI" indication
flashes whenever
recording is
attempted.
Erasure prevention tab on
cassette is broken off.
Use tape with intact erasure prevention tab, or cover
tab hole with adhesive tape, if original recording is no
longer required.
Picture is recorded
with noise or blank
screen. Aerial or aerial lead is
defective. Check aerial connection to VTR. See page 5.
Check your normal TV picture. If there is no picture,
check your aerial.
VTR is not correctly tuned. Re-tune VTR. See page 8.
Ensure input selector set to TV programme.
Input selector is set to A1. Select the required TV programme.
Timer recording
cannot be
performed.
Clock or calendar is
incorrectly set. Check clock and calendar. Set to present time.
(Note this is a 24 hour clock.) See page 7.
Clock is flashing 0:00. Set clock to present time.
Recording start or end time
settings is incorrect. Set recording start and end time correctly. Try a short
timer recording a few minutes ahead of the present
time to confirm correct operation. See page 18.
VTR is not set for timer
recording. Press TIMER REC after programming for timer
recording.
AV external
recordings cannot be
made.
Input selector is not correctly
set. Select A1.
External AV connections are
incorrect. Check that connections for external video and audio
source are correct. See page 22.
J2