To select the desired tape speed, Notes, To interrupt recording – Panasonic NV-HD100EA User Manual
Page 17: To record one tv programme while, Viewing another programme, To display the approximate remaining, Tape time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the-spot Recording
To select the desired tape speed
Press SP/LP before recording.
SP/LP
□
Notes:
•When a video cassette iwith a broken off tab is inserted,
the “BS” indication will flash to indicate that recording is
not possible.
•The recording pause mode will be automatically released
after 5 minutes.
0-
c
c
■C
ct
V
a
c
C
.c
5:
ct
I
To interrupt recording
Press PAUSE/STILL during recording.
Press again to continue recording.
PAUSE/
STILL
0
To record one TV programme while
viewing another programme
1 Refer to the on-the-spot recording operations steps 1
to 4,
2 Press VTR/TV to select the TV mode.
3 Select the TV programme on your TV set you wish to
view at the present time.
To display the approximate remaining
tape time
1 Press TAPE SELECT to select the corresponding
cassette tape length.
TAPE
SELECT
o
E195: ForE30, -60, -80, -120, -180 and-195 tapes.
E240. For E240 tape.
E260: For E260 tape.
2 Press DISPLAY.
DISPLAY
o
c
Clocks Counter—
Remaining Tape Time-