Panasonic NV-HD100EA - Manual (Page 11)

Controls and Connection Sockets
0 NOISE FILTER
OFF: For normal VTR operation.
ON:
For playback of a cassette whose recording
quality is inferior.
® REMOTE MODE (VTR 1/2)
VTR 1: Set at this position on both the VTR and
remote controller for normal use with one VTR.
VTR 2: Set at this position when using two Panasonic
VTRs.
This allows the remote controller to be set for
operating VTR 1 or VTR 2,
0 NICAM/MONO
NICAM: Normally set at this position.
MONO:
Only set at this position to record the normal
sound during a NfCAM broadcast or if the
stereo sound is distorted due to inferior
reception conditions.
© VTR/TV
To select the VTR mode or TV mode.
© AUDIO DUB
To set up the VTR for audio dubbing.
A.DUB indicator lights up.
© INSERT
To set up the VTR for insert editing.
INSERT indicator lights up.
© Hi-Fi/NORMAL MIX
OFF: Normally set at this position to reproduce the
better sound available from the Hi-Fi track.
ON: Both sound tracks are played back mixed
together. Use this setting when playing back a
cassette tape which has been insert edited or
audio dubbed.
0 Infra-red Remote Control Receiver Window
© Display
0 CHECK/PROG
To select a timer programme number.
"1,2,3... or 8’’is lit.
To display details of preset timer recording.
© -+/ V A
To set the clock and timer recording.
To select the required programme position {TV
station).
0 NEXT/SP/LP
To proceed to the next item during setting procedure.
To select the tape speed required for recording.
SP gives the best picture quality.
LP gives the longest recording time.
® SHIFT/SLEEP
To blank unoccupied programme position.
To set the time to turn off the VTR automatically.
® REC
To start a recording.
0 TIMER REC
To turn the timer recording function on and off.
B is lit or not lit.
The VTR can only be operated manually when the
timer recording function is off.
© MIC
To connect a microphone for recording.
This socket has priority.
© Jog Dial
To locate any desired frame with utmost precision.
0 Shuttle Ring
In the stop mode: To rewind or fast forward the tape.
In the playback mode:
To search picture backward or
forward.
In the still playback mode:
To adjust playback speed backward
or forward.
In the rewind or fast forward mode:
To obtain high speed picture.
© RFOUT
To connect to the aerial terminal on a TV set.
Video Playback Channel Selector
To select the video playback channel.
© AUDIO IN
To connect the audio cable to a video camera or
another video recorder.
0 VIDEO IN
To connect the video cable to a video camera or
another video recorder.
© AUDIO OUT
To connect the audio cable to a TV or another video
recorder.
© VIDEO OUT
To connect the video cable to a TV or another video
recorder.
© RFIN
To connect to the external aerial.
© TEST SIGNAL
The test signal is transmitted on channel L or H.
© Signal Ground Terminal
To connect the Signal Ground Terminal to the ground
to reduce the noise from microphone cable.
© ACIN--
To connect to the main power supply.
C
,c
•i
c
c
I
11