To change the playback speed, 1 press pause/still, To locate the desired picture exactly – Panasonic NV-HD100EA User Manual
Page 15: To skip scene, To return to a specified scene, To playback a recorded part repeatedly, To find the beginning of each recording, Note, Q—o—^3, Other playback functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playback
Other Playback Functions
To change the playback speed
Using Shuttle Ring:
1 Press PAUSE/STILL.
1 Press SEARCH.
2 Press + or - repeatedly.
+; To increase the playback speed forward.
-: To increase the playback speed backward.
SEARCH
Q—O—^3
To locate the desired picture exactly
1 Press PAUSE/STILL.
2 Turn Jog Dial.
To obtain high speed picture during fast
forward or rewind
Keep FF pressed during fast forward.
Keep REW pressed during rewind.
©/FF
REW/©
•The same operation can also be performed by turning the
Shuttle Ring,
To skip scene
Press SKIP during playback.
SKIP
o
•The following 30 seconds will be skipped.
• Each press gives a 30 seconds time span up to 4 minutqp.
To return to a specified scene
1 Press RESET to set the counter to 0:00.00.
2 After playback, press ZERO STOP in the stop mode.
RESET
O
ZERO STOP
O
•The tape will be rewound or fast forwarded to 0:00.00.
To playback a recorded part repeatedly
Press REPEAT in the stop mode or during playback.
REPEAT
O
Beginning
of Tape
mux
End of
Recorded Part
I
Repeat Playback '------- y-------'
PLAY Control Signal Interruption
(at least 5 sec.)
CZJ
REW
To find the beginning of each recording
For example:
Searching for the 2nd recorded segment in the forward
direction.
Press
INDEX ►W
twice.
INDEX
0—0
•After finding the specific recorded segment, playback
starts automatically.
•For the reverse direction, press INDEX m .
• Up to 20 index signals can be searched for in both
directions.
Recording Index Signals
Index signals are recorded in following cases.
WRITE indicator appears on the Display.
•When a recording is started by pressing REC.
•When REC is pressed during recording.
•When timer recording is activated.
Note:
•Audio reproduction of linear (conventionally recorded)
tapes will be monaural when played back on the FM Hi-Fi
video recorders.
•Cue, review or slow playback wilt be automatically
released after 10 minutes, and still playback after
5 minutes.
•The Index search function can only work correctly, if the
index signals are spaced at least 3 minutes apart in the
SP mode and 5 minutes apart in the LP mode.
c
c
0
I