Panasonic NV-HD100EA - Manual (Page 30)

Daily Timer Recording
For this time setting, three day patterns can be selected:
(X) Daily recording from Sunday to Saturday
C§) Daily recording from Monday to Friday
© Daily recording from Monday to Saturday
(MO-FR)
□
(MO-SA
□
(SU-SA)
□
® d) ©
Weekly Timer Recording
Trace the bar code for the day of the week in the
EVERYWEEK column.
For example, SU (Sunday)
EVERYWEEK SU ^
on / ONF
Timer Recording from an External Signal
Source
if a timer recording is to be made from a signal source that
is connected to the Audio/Video input sockets, the “AV” bar
code in the CHANNEL column must be traced for the
programme.
Checking a Timer Programme
The VTR must be turned on, or the timer recording indicator
‘‘[I]”is lit.
1 Trace the CHECK bar code.
2 Transmit the data to the VTR.
•To check the settings for the next timer recording, press
TRANSMIT.
CHECK
Q-
Cancelling a Timer Programme
The data for the timer recording must first be displayed.
1 Trace the CHECK bar code.
2 Transmit the data to the VTR.
3 Trace the CANCEL bar code.
4 Transmit the data to the VTR.
CANCEL
Q-
AV2 cannot be selected with bar code.
Selecting the Desired Tape Speed
Trace the bar code for RECORDING "SP” or “LP".
RECORDING
ran mull 111^ OH'■ ■■ :■
Turning the Timer on and off
After programming a timer recording, the timer recording
indicator “[g” lights up, and the VTR can no longer be used
for normal recording and playback. To make it possible to
use the VTR, trace the TIMER ON/OFF bar code and
transmit to the VTR (the timer recording indicator “[3” will
go out). To reactivate the timer again, trace the TIMER
ON/OFF bar code again and transmit to the VTR (the “ID”
indicator will light again).
TIMER ON/OFF
D-
30