Editing, Preparation, Operations – Panasonic NV-HD100EA User Manual
Page 22: 4 search for the end of the previous * recording, 2 press pause/still at the end point, Note, Assembly editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
This enables you to record a new segment immediately
after a previously recorded segment.
AUDIO IN VIDEO IN
Preparation
•Connect a movie camera or another VTR to this VTR as
shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
•Select the video source required by pressing INPUT
SELECT to set A1.
1
2
□□
3
□□ REC
MX
Operations
4 Search for the end of the previous
* recording.
2 Press
PAUSE/STILL
at the end point.
PAUSED
STILL
0
3
Set for the new recording by pressing
REC
• REC
O
4
Start the new recording by pressing
PAUSE/STILL
again.
PAUSE/
STILL
0
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
22