Yamaha RX-497 - Manual (Page 39)

ADVANCED SETUP
■ ADVANCED SETUP menu parameters
change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Factory presets ! s i ' ! T
Use to reset all parameters to the factory presets.
Choices: CANCEL, RESET
• Select CANCEL if you do not want the parameters of
this unit to be initialized tvhen you reset the factory
presets.
• Select RESET if you w'ant all of the parameters of this
unit to be initialized when you reset the factory presets.
Notes
• This setting does not affect the parameters in the ADVANCED
SETUP menu.
• The resetting process starts next time you turn on the power of
this unit­
Remote filEr'IOTIE
Use to switch the remote control ID of this unit.
Choices: IDE ID2
• Select IDl to operate this unit using an alternative
code.
• Select ID2 to operate this unit using the default code.
Note
You must also make settings for the remote control (see page 36).
Tuner ! i.i
(Asia and General models only)
Use to switch the frequency step selection according to the
frequency spacing in your area.
Choices: AD/IIO/FMIOO, AM9 FM50
• North, Central and South America:
AMlO/FMiOO (kHz)
• Other areas: AM9.TM50 (kHz)
Changing the ADVANCED SETUP
menu parameters
The ADVANCED SETUP menu is displayed in the front
panel display
• During the ADVANCED SETUP procedure, audio output is
muted.
• During the ADVANCED SETUP procedure, only MASTER
ON/OFF, A/B/C/D/E and the preset station'channel number
buttons (1 and 2) on the front panel are operational.
1 , 2 , 5
i-.., s
n
I I
2 , 4 3
1 Press MASTER ON/OFF on the front panel to
release it outward to the OFF position.
Press and hold A/B/C/D/E on the front panel
and then press MASTER ON/OFF inward to
the ON position.
The power of this unit is turned on, and the
ADVANCED SETUP menu appears in the front
panel display.
While holding down,
press
35