Note, C5) input selector, Category – Yamaha RX-497 User Manual
Page 31: All channel search mode, Category search mode, Preset search mode, 7) preset channel number buttons, 8) memory, U) search mode, Ii) xm ant (antenna)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
XM SATELLITE RADIO TUNING
This section describes the functions of each control used
for the XM Satellite Radio tuning.
Note
The following controls on the front panel and Ihe remote conlrol
are only available when XM is selected as the input source and
the XM Connccl-and-Play digital antenna accessory is connected
to the XM jack on the rear panel of this nnit (see “XM Satellite
Radio connections").
■ Controls on the front panel
XM Satellite Radio functions
C5) INPUT selector
Selects XM as the input source.
® CATEGORY
All Channel Search mode
Switches between channel categories while staying in
the All Channel Search mode.
Category Search mode
Switches betw'een channel categories.
Preset Search mode
Selects the preset channel group (A to E).
(7 )
Preset channel number buttons
Select the preset channel number (1 to 8) directly.
Pressing these buttons switches the search mode to the
Preset Search mode.
(8) MEMORY
Stores a radio channel in the system memory.
u) SEARCH MODE
Switches between the All Channel Search, Category
Search, and Pre.set Search modes (see page 31).
ii)
XM ANT (ANTENNA)
Shows the reception level of the XM Connect-and-Play
digital antenna (sold separately).
(3) TUNING/CH
All Channel Search mode
Searches for a radio channel within all channels.
Press and hold for quick search.
Category Search mode
Searches for a radio channel w ithin the selected
category. Press and hold for quick search.
Preset Search mode
Selects the preset channel number (1 to 8).
v4) DISP (DISPLAY)
Switches the XM Satellite Radio information shown in the
front panel display between channel mimber/nanie,
category and artist nanie/song title (see page 30).
27