Note – Yamaha RX-497 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FM/AM TUNING

■ Customized automatic preset tuning

You can specify a preset station group and a preset station
number from which this unit stores the FM stations
received by automatic preset tuning.

Press and hold MEMORY on the front panel

for more than 3 seconds.

Press TUNING/CH <1 / > on the front panel to

begin automatic preset tuning.

Press l> to tune into higher frequencies.
Press <3 to tune into lower frequencies.

When automatic preset tuning is complete, the

frequency of the last preset station is shown m the
front panel display.

'S.l TUMING/CH i:-'

Press A/B/C/D/E and then press one of the

preset station/channel number buttons on

the front panel to select the preset station

group and the preset station number where

the first received station will be stored.

For example, if you select C5, the first received
station

automatically programmed to C5 and the

next received stations are sequentially programmed

to C6. C7. etc.

Note

Automatic preset tuning stops when the received stations have all
been stored up to E8.

♦