Automatic preset tuning, Notes – Yamaha RX-497 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FM/AM TUNING
Automatic preset tuning
You can use the automatic preset tuning method to
automatically store FM stations. This function enables this
unit to automatically tune into FM stations with strong
signals and store up to 40 (8 stations in each of the 5
groups, A1 to E8) of those received stations in order. You
can then easily recall any preset stations by selecting the
preset station numbers w here they are stored.
Notes
• Any station data stored under a preset station number is cleared
when you store a new station under that preset station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically slops once searching all
available stations are tuned into and stored.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, try using the manual
preset tuning method.
HE
I
1
Rotate the INPUT selector (or press TUNER
on the remote control) to select TUNER.
2
Press FM/AM on the front panel to select FM
as the reception band.
FM appears in the front panel display.
Press and hold MEMORY on the front panel
for more than 3 seconds.
The preset station group and the MEMORY and
AUTO indicators flash in the front panel display.
Press TUNING/CH <1 /1> once to begin
automatic preset tuning.
Press I> to tune into higher frec[uencies.
Press ■<] to tune into lower freciuencies.
When automatic preset tuning is complete, the
frequency of the last preset station is shown in the
front panel display.
-.3 TUWirSG/CH I-.:-
Notes
•
If TUNING/CH <1 /1> IS not pressed within approximately .s
seconds while the MEMORY and AUTO indicators are
flashing, automatic preset timing automatically begins from the
currently displayed frequency and proceeds toward higher
frequeiicies.
• Received stations are sequentially programmed to 8 stations in
each preset station group. If 8 stations are all programmed in a
preset station group, another 8 stations are sequentially
programmed in the next preset station group.
Front panel
Remote control
22