Yamaha RX-497 - Manual (Page 37)

XM SATELLITE RADIO TUNING
Direct Number Access mode
ml
1
Repeat step 1 in “Basic XWI Satellite Radio
operations”.
2
Press SEARCH MODE on the front panei (or
SRCH MODE on the remote control)
repeatedly to select the All Channel Search
mode or the Category Search mode.
ALL CH SEARCH or CAT SEARCH appears in the
front panel display.
I MENI
SRCH №0I
Front panel Remote control
Press numeric buttons on the remote control
sequentially to enter the desired channel
number.
Setting XM Satellite Radio preset
channels
You can use this feature to store up to 40 XM Satellite
Radio channels (8 preset channel numbers in each of the 5
preset channel groups. A1 to E8). You can then easily
recall any preset channel by selecting the preset channel
group and the preset channel number as described in
“Preset Search mode” on page 32.
1
Search for the XM Satellite Radio channel
you want to set as a preset channel.
To search for the desired channel, perform the step.s
in “All Channel Search mode”, “Category Search
mode” or “Direct Number Access mode”.
2
Press MEMORY on the front panel or on the
remote control.
The MEMORY indicator flashes in the front panel
display for approximately 5 seconds.
Press ENT. on the remote control to
immediately tune into the channel with fewer
than three digits for the channel number.
If no button is pressed within a few seconds after entering one­
digit or Iwsr-digit channel number, this unit automatically
confirms Ihe entered channel numher and tunes info the selected
channel.
Pressing a button other than the nutncric buttons or ENT. on the
remote control cancels the Direct Number Access procedure.
Front panel Remote control
♦
MEMORY
Flashes
33