2 press and hold the tab, Orient the am loop antenna for the best reception, Notes – Yamaha RX-497 User Manual
Page 17: 4 release the tab
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
■ Connecting the AM loop antenna
1
Set up the AM loop antenna.
2
Press and hold the tab.
Repeat steps 2 to 4 to insert the AM loop
antenna lead wires into the GND terminal.
Orient the AM loop antenna for the best
reception.
Notes
• The AM loop antenna should he placed away from this unit.
• A properly installed outdoor anlenna provides clearer reception
than an indoor one. If you experience poor receplion quality, an
outdoor antenna may impixwe the quality. It is recommended
that you should comiect a .5 to 10 m of vitiyhcovered wire to the
AM ANT terminal and extend it outdoors from a window.
Cotistih your nearest authorized YAMAHA dealer or service
center about outdoor antennas.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
3
Insert the AM loop antenna lead wires into
the AM ANT terminal.
4
Release the tab.
13