Yamaha RX-497 - Manual (Page 29)

Selecting preset stations
You can tune into the desired station simply by selecting
the preset station number where it is stored.
Press A/8/C/D/E on the front panel
repeatedly (or press A-E/CAT. < / > on the
remote control) to select a preset station
group (A to E).
The selected preset station group is shown in the front
panel display.
A/
Front panel
PRESfT/CH
Remote control
Press one of the preset station/channel
number buttons on the front panel (or
PRESET/CH /^ / \/ on the remote control) to
select a preset station number (1 to 8).
The preset station number appears in the front panel
display along with the reception band and the
frequency.
Front panel
or
FM/AM TUNING
Exchanging preset stations
You can exchange the assignment of two preset stations
with each other. The following procedure describes an
example where a preset station El is exchanged with
another preset station A5.
2,4
! ■
„.................
1
Repeat steps 1 and 2 in “Selecting preset
stations” to select a preset station E1.
2
Press EDIT on the front panel.
E! and the MEMORY indicator flash in the front
panel display.
MEMORY
Flashes
Repeat steps 1 and 2 in “Selecting preset
stations” to select another preset station AS.
A5 and the MEMORY indicator flash in the front
panel display.
MEMORY
Flashes
4
Press EDIT on the front panel again.
E1-A5 appears in the front panel display, indicating
that the two preset station assignments have been
exchanged.
PRESET/ClOv’
Remote control
25