Recording a source, Notes, Note – Yamaha RX-497 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PLAYING AND RECORDING

Recording a source

Notes

The VOLUME. BASS, TREBLE, BALANCE and
LOUDNESS controls and the PURE DIRECT buttons have no
effect on the source being recorded.
Check the copwight laws in your coiintiy' to record from
records. CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.

Play the selected source to record from.

Rotate VOLUME on the front panel (or press

VOLUME +/- on the remote control) to adjust
the sound output level of the selected source

to record from.

Remote control

Begin recording on the MD recorder, the tape

deck or the VCR connected to this unit.

If the 3-head tape deck is used for recording, you can monitor the
sound of recording by pressing MD/ TAPE MONITOR on the
front panel.

Rotate the INPUT selector on the front panel

(or press one of the input seiector buttons on

the remote control) to select the source you

want to record from.

Front panel

Remote control

Note

You cannot select any input source while the MD.tTAPE MON

indicator in the front panel display lights on.