Fm/am tuning, Automatic tuning, Notes – Yamaha RX-497 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FM/AM TUNING
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of
station signals.
Automatic tuning
Automatic tuning is effective when station signals are
strong and there is no interference.
2 4
3
-Í
1
Rotate the INPUT selector (or press TUNER
on the remote control) to select TUNER as
the input source.
4
Press TUNING/CH o/> once to begin
automatic tuning.
Press O to tune into a higher frequency.
Press <3 to tune into a lower frequency.
TUNiNG/CH
d
-
Notes
• W lioii vou tuiie into a station, the frequency of the received
station is shown in the front panel display.
• To search for another station, press TUNING,'CH <3 ,■ t> once
more.
• If the tuning search does not stop at the desired station because
the station signals are weak, try' using the manual tuning
method.
Front panel
Remote control
2
Press FM/AWI on the front panei to seiect the
reception band (FM or Al\/I).
FM or AM appears in the front panel display.
3
Press TUN MODE on the front panel so that
the AUTO indicator lights up in the front
panel display.
AUTO
Lights up
20