Yamaha RX-497 - Manual (Page 12)

CONTROLS AND FUNCTIONS
(9) SPEAKERS A/B
Turns on or off the set of speakers connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel of this unit when the corresponding button is
pressed each time.
Use to set up remote control codes (see page 41).
(n) SLEEP
Sets the sleep timer.
(12; VOLUME+/-
Increases or decreases the sound output level.
Notes
• This does not affect the OUT (REC) level.
• WTien you press VOLUME +/- to control the sound output
level of this ruiit, VOLETME on the front panel rotates.
(g; MUTE
Mutes the sound output. Press again to restore the sound
output to the previous v'olume level (see page 19).
Note
The sound output to Zone 2 is not muted.
(gi ENT (ENTER)
Confirms an entered channel number during the Direct
Number Access mode when XM is selected as the input
source.
(g; SRCH (SEARCH) MODE
Switches between the XM Satellite Radio search modes
(see page 31) when XM is selected as the input source.
(g DISPLAY
Switches the XM Satellite Radio information shown in the
front panel display between channel number/name,
category and artist name/song title when XM is selected as
the input source.
Note
Ihe XM Satellite Radio features (XM, SRCH MODE. DISPLAY,
A-E/CAT. < / >, PRESET/CH / w, MEMORY and ENT.) are
only applicable to the U.S.A. model and are operational only
when XM is selected as the input souree. For details, see “XM
SATELLITE RADIO TUNING” on page 26.
8