Panasonic CQ-DF802U - Manual (Page 63)

Specifications
□ General
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Bass:
Treble:
Suitable speaker impedance:
Preamp output voltage:
Subwoofer output voltage;
Preamp output impedance:
12 V DC {10.8 V-16 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 Wx4 channels)
50 Wx4 channels at 1 kHz, volume control maximum
±12 dB at 120 Hz ■
±12 dB at 10 kHz
4-8 0
5.0 V (CD play mode; 1 kHz, 0 dB)
5.0 V
60 0
Subwoofer output impedance: 60 O
Dimensions (WxHxD): 7"xVV i 6" x 6V b " (178x50x155 mm)
Weight; 3 lbs. 12 oz (1.7 kg)
□ FM Stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity:
Alternate channel selectivity:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
87.9 MHz-107.9 MHz
12.0 dBf. (75 O)
15.0 dBf. (75 0)
75 dB
35 dB (1 kHz)
75 dB
100 dB
60 dB
□ AM Radio
Frequency range:
Usable sensitivity: 530 kHz-1 710 kHz
29dB/iiV (25 [iV, S/N 20 dB)
□ CD Player
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source;
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter;
Channel separation:
8 times oversampling
MASH-1 biV4DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz-20 kHz(±1 dB)
95 dB
0.02 % (1 kHz)
Below measurable limits
90 dB
Above specifications comply with EIA standards.
Note:
• Specifications and the design are subject to modification without notice due to improvements in technology.
CQ-DF802U
63