Panasonic CQ-DF802U - Manual (Page 27)

Clock Basics
Volume
[VOL Al: Up
IVOL
V]: Down
Setting range: 0 to 40
Note:
• The sound level for each source is stored in
memory.
(There is one volume setting for AM radio
band, and one volume setting for FM radio
band.)
Mute/Attenuation
ON: Press I MUTE I /[MUTEl.
(QD
indicator lights.)
OFF: Press [MUTE] /[MUTE] again.
: No sound.
; Decrease the volume to Vio.
NUTE
Decreasing volume range depends on setting.
(^ page 44)
Open/Close the Front Panel
OPEN: Press [OPEN] on the front panel.
CLOSE: Raise the panel by hand.
Caution:
• To avoid damaging the front panel, do not push
it down or place objects on it while it is open.
• Do not pitch your finger or hand in the front
panel.
• Do not insert foreign matter into the disc slot.
The 12-hour system is used for the clock.
Initial Time
(T)
Press IP/SPMy|/[DISP] (display).
(Clock display) HlJJUST
@
Press and hold |o/SPMy|/tOISPl (display) tor
more than 2 seconds.
(Hours blink.)
Press or or [ V ] .
(Hours set.)
h I'J10=00
xwHOUR
@
Press | d / spla 7|/[DISP] (display).
(Minutes blink.)
Press or /[/\] or [V].
AL'J10=10
MIN ^
(Minutes set.)
(6) Press
\
display
\/[D\S?\
(display).
(End.) 1 0 = 1 0
Note:
• Press and hold or ' ^ ^ / [ / \ ] or [v] to
change numbers rapidly.
• You can select the clock display during the unit
off. (^ page 44)
Time Reset
Press and hold lo/SPMyj/fDISP] (display) for more
than 2 seconds to activate the time setting mode to
reset the time. Then, repeat steps @ to (g).
CQ-DF802U
27