Panasonic CQ-DP171U - Manual (Page 41)

Specifications
□ General
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Bass:
Treble:
Suitable speaker impedance:
Pre-Amp output voltage:
Output impedance:
Dimensions (W x H x D):
Weight:
□ FM stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity:
Frequency response:
Alternate channel selectivity:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
□ AM Radio
Frequency range:
Usable sensitivity:
□ CD Piayer
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
MP3 decoding;
Bit rate:
Sampling frequency:
12 VDC {11 V - 1 6 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 W x 4 channels)
45 W X 4 channels at 1 kHz, Volume control maximum
±12 dB at 100 Hz
±12 dB at 10 kHz
4 - 8 Q
2.0 V (CD play mode; 1 kHz, 0 dB)
200 n
7” X I^Vie” x 5Vs” (178 x 50 x 150 mm)
3 lbs, 5 oz (1.5 kg)
87.9 MHz-107.9 MHz
11.0 dBf. (1.25 pV,75 Q)
15.2 dBf. (1.6 pV,75 Q)
30 Hz-15 kHz (±3dB)
75 dB
42 dB (1 kHz)
75 dB
100 dB
70 dB
530 k H z - 1 710 kHz
28 dB/pV (25 pV, S/N 20 dB)
32 times oversampling
MASH*1 bit/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 H z - 2 0 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
MPEG 1 Audio Layer 3/MPEG 2 Audio Layer 3
(MPEG 1 Audio Layer 3) 32 kbps - 256 kbps, VBR (Variable Bit Rate)
(MPEG 2 Audio Layer 3) 16 kbps -160 kbps, VBR (Variable Bit Rate)
(MPEG 1 Audio Layer 3) 32 kHz, 44.1 kHz, 48 kHz
(MPEG 2 Audio Layer 3) 22.05 kHz, 24 kHz
Above specifications comply with E!A standards.
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
CQ-DP171U
41