Power, Volume, Anti-volume-blast circuit – Panasonic CQ-DP171U User Manual

Page 11: Mute, Mode selection, Cd player, Tuner, Cd changer, Power and sound controls, Loudness

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Power and Sound Controls

Power

Turn the key in the ignition until the accessory indicator iights.

Power on : Press [SOURCE] (PWR).

Power off: Press [SOURCE] (PWR) again and hold.

Note:

When you use this unit for the first time, a demon

stration message appears on the display.

To cancel this display, press [DISP].

Volume

[AVOL]: Up
IVVOL] :

Down

Press and hold for rapid adjustment.

Anti-Volume-Blast Circuit:
When the power is switched off and on again, the volume

slowly rises to the previous level.

The anti-volume-blast circuit will not work when the volume

level is set lower than position 20 on the display.

Volume level (Oto 40)

Remote control sensor

Mute

Press [MUTE] to mute the sound completely.

Loudness

(Only for main unit)

Press

[LOUD]

to enhance bass and treble

tones at low or medium volume.

Press [MUTE] again to cancel.

Press

[LOUD]

again to cancel.

Mode Selection

Press [SOURCE] to change the mode.

CD Player

Tuner

{^page 14)

(When a CD is in the player.)

(“♦ page 16)

CD Changer

MP3 Player

{When a CD changer is connected and

magazine is in the changer.) page 22)

(When a MP3 files recorded disc

is in the player.) page 18)

CQ-DP171U