DVR systems DVRxx04HF-U Series User Manual
Page 81
71
Figure 5-4
Figure 5-5
5.3.2 Encode
Encode setting includes the following items. See Figure 5-6.
Please note some series do not support extra stream.
z
Channel: Select the channel you want.
z
Type: Please select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.
z
Compression: System supports H.264.
z
Resolution: System supports various resolutions, you can select from the dropdown
list. Please note the option may vary due to different series.
The general series
The main stream supports D1/HD1/2CIF/CIF/QCIF and the 1-16-channel extra stream
supports CIF/QCIF.
The HD-SDI series
The main stream supports 1080P/720P/D1/HD/2CIF/CIF/QCIF and the extra stream
supports 1080P/720P/D1/HD1/2CIF/CIF/QCIF.
The 960H series
The main stream supports 960H/D1/HD1/2CIF/CIF/QCIF and the extra stream supports
960H/D1/HD1/2CIF/CIF/QCIF.
z
Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
z
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set
video quality.
z
Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.
z
Video/audio: You can enable or disable the video/audio.
z
Overlay: Click overlay button, you can see an interface is shown in Figure 5-7.
Cover area (Privacy mask): Here is for you to set privacy mask section. You can drag
you mouse to set proper section size. In one channel video, system max supports 4
zones in one channel.