DVR systems DVRxx04HF-U Series User Manual
Page 146
136
Device connects to the internet via PPPoE after reboot. You can get the IP address in the
WAN from the IP address column.
Note:
After PPPoE successful dial, you need to go to the device local end to get device current
IP address and then use the client-end to access this IP address.
Figure 7-38
UNPN
Go to the UPnP interface, you can see an image is shown as in Figure 3-39.
It allows you to establish the mapping relationship between the LAN and the public
network.
Here you can also add, modify or remove UPnP item.
Figure 7-39 UNPN