DVR systems DVRxx04HF-U Series - Manual (Page 120)

110
7 WEB CLIENT OPERATION
There might be slightly difference in the interface due to different series.
7.1 Network Connection
Before web client operation, please check the following items:
z
Network connection is right
z DVR and PC network setup is right. Please refer to network setup(main
menu->setting->network)
z Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not.
Usually the return TTL value should be less than 255.
z Open the IE and then input DVR IP address.
z System can automatically download latest web control and the new version can
overwrite the previous one.
z If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you
can go to C:\Program Files\webrec to remove single folder. Please note, before you
un-install, please close all web pages, otherwise the un-installation might result in
error.
7.2 Login
Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See
X428H428H428H
Figure 7-1
X
Figure 7-1
System pops up warning information to ask you whether install webrec.cab control or not.
Please click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See
X429H429H429H
Figure
7-2
X
.
Input your IP
address here.