DVR systems DVRxx04HF-U Series - Manual (Page 118)

108
Figure 6-8
6.2.4 Activate Patrol
In
X414H414H414H
Figure 6-6
X
, input patrol number in the No. blank and click patrol button
6.2.5 Pattern Setup
In
X415H415H415H
Figure 6-5
X
, click pattern button and then click begin button. The interface shows like
X416H416H416H
Figure 6-9
X
.
Please go to
X417H417H417H
Figure 6-2
X
to modify zoom, focus, and iris. Go back to
X418H418H418H
Figure 6-9
X
and click
end button.
You can memorize all these setups as pattern 1.
Figure 6-9
6.2.6 Activate Pattern Function
In
X419H419H419H
Figure 6-6
X
input mode value in the No. blank, and click pattern button.
6.2.7 Border Setup
In
X420H420H420H
Figure 6-5
X
, click border button. The interface is shown as in
X421H421H421H
Figure 6-10
X
.
Please go to
X422H422H422H
Figure 6-2
X
, use direction arrows to select camera left limit, and then please
go to
X423H423H423H
Figure 6-10
X
and click left limit button
Repeat the above procedures to set right limit.