DVR systems DVRxx04HF-U Series User Manual
Page 127
117
click stop record button. Now you have set one pattern.
7.2.2.6 Preset
In
X441H441H441H
Figure 7-12
X
, move the camera to your desired location and then input preset value.
Click add button, you have set one preset.
7.2.2.7 Auto tour
In
X442H442H442H
Figure 7-12
X
, input auto tour value and preset value. Click add button, you have added
one preset in the tour.
Repeat the above procedures you can add more presets in one tour.
7.2.2.8 Assistant
You can select the assistant item from the dropdown list. See
X443H443H443H
Figure 7-13
X
.
7.2.2.9 Matrix
This series product supports matrix extension function. You can control the video input
and output switch
7.2.2.10 Light and wiper
If your PTZ protocol supports the light and wiper control function. You can enable/disable
the light or the wiper.
Figure 7-13
7.2.3 Color
Click color button in section 3, the interface is shown as
X444H444H444H
Figure 7-14
X
.
Here you can select one channel and then adjust its brightness, contrast, hue and
saturation. (Current channel border becomes green).
Or you can click default button to use system default setup.