DVR systems DVRxx04HF-U Series - Manual (Page 110)

100
Figure 5-51
5.6.1 HDD Information
Here is to list hard disk type, total space, free space, video start time and status. See
X391H391H391H
See
Figure 5-52.○ means current HDD is normal. X means there is error. - means there is no
HDD.
If disk is damaged, system shows as “?”. Please remove the broken hard disk before you
add a new one.
Once there is a hard disk confliction, please check hard disk time and system time is the
same or not. Please go to setting then general to modify system time. At last, reboot the
system to solve this problem.
After system booted up, if there is any confliction, system goes to HDD information
interface directly. Please note, system does not ask you to deal with it forcedly.
When HDD confliction occurs, you can check system time and HDD time are identical or
not. If they are not identical, please go to General (Chapter 5.3.1) to adjust system time or
go to HDD Management (Chapter 5.5.1) to format HDD and then reboot the DVR.
Figure 5-52