DVR systems DVRxx04HF-U Series - Manual (Page 64)

54
Figure 4-19
4.5 Detect
4.5.1 Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface. See
Figure 4-20.There is three detection types: motion detection, video loss, camera
masking.
4.5.2 Motion Detect
Detection menu is shown as below. See Figure 4-20
z
Event type: from the dropdown list you can select motion detection type.
z Channel: select the channel to activate recording function once alarm occurred.
Please make sure you have set MD record in encode interface(Main
Menu->Setting->Schedule) and schedule record in manual record interface(Main
Menu->Advanced->Manual Record)
z Latch: when motion detection complete, system auto delays detecting for a specified
time. The value ranges from 10-300(Unit: second)
z Region: Click select button, the interface is shown as in Figure 4-21. Here you can
set motion detection zone. There are 396(PAL)/330(NTSC) small zones. The green
zone is current cursor position. Grey zone is the motion detection zone. Black zone is
the disarmed zone. You can click Fn button to switch between the arm mode and
disarm mode. In arm mode, you can click the direction buttons to move the green
Select search
engine here
You can see result here. Double click
file name, you can view the image
content.
There are max 100 files in one
page. Click here to view more.
Select a file and then
click here to view
image content.