Daiwa SEABORG-300FB - Manual (Page 33)

31
Functional setting operation
(10. Display revision)
5. After 100.0 is reached, then press the MODE BUTTON
(JIG/PICKUP BUTTON) to return to depth display.
On the revised display, pressing the RESET BUTTON will
change the reading back to the unrevised value.
The INVERSE COUNTER indicator will turn off once the
revision has been made.
4. Move the power lever to change the displayʼs reading to 100.0 .
(Occasionally, for the revision rate, the exact number cannot
be attained.)
5
OFF MAX
UP DOWN
4
Setting exactly to 100.0 may be difficult. If so, set the display as
close as possible.