Daiwa SEABORG-300FB - Manual (Page 26)

24
Chumming timer
This function provides a useful timer.
- This function displays the time passed after the presentation of
your bait or lure. It can be used for chumming, jigging timing or
reeling in your rig.
- The chumming timer starts from 7.0 m on the counter, unless a
specific fishing range has been entered into memory.
Display time is shown in seconds if remaining time is less than 60
seconds, in minutes if remaining time is more than a minute.
Attention
Pressing the INVERSE COUNTER BUTTON while the timer is in operation re-starts the
timer from 0.0 .
Functional setting operation
(6. Chumming timer )
Counter initially shows seconds, after 1minute, indicates minutes.
The timer function cannot be cancelled.