Line data input, Daiwa braided line), P0 line input mode – Daiwa SEABORG-300FB User Manual
Page 12
10
Line data input
(Daiwa braided line)
7.
Default setting “PE 4 – 300 m” is shown on the display and
P0
blinks.
9.
After the value is set with the power lever, press the
MODE
(JIG/PICKUP) BUTTON
. This completes the operation and
returns to (
0.0
m).
8.
Set the value with the power lever.
-Tilting the lever forward increases the value.
-Pulling the lever back decreases the value.
8
7
or
9
Power lever
OFF
MAX
UP
DOWN
Use
P0 Line Input Mode
The SEABORG 300FB has data PE4-300m for the above Daiwa braided lines stored in
the reel’s memory. Therefore, when winding these lines, there is no need for additional
data input.
The table below shows the list of data.
Line thickness PE (Display shows PE at upper left of the
display) (m)
PE 3
PE 4
PE 5
200
200
200
230
300
300
400