Daiwa SEABORG-300FB - Manual (Page 32)

30
Functional setting operation
(10. Display revision)
Display revision
You can recalibrate the counter should it not indicate an accurate depth compared to depth markings
on your line.
Example below is the case in which, though the counter shows
103 m, color markings on the line indicate 100 m.
3 . Press MODE BUTTON (JIG/PICKUP BUTTON) and RESET
BUTTON at the same time for 2 seconds.
This displays revision display.
Use
The counter setting can be changed while
fishing.
1
2
3
MODE BUTTON
2.
Press MODE BUTTON (JIG/PICKUP BUTTON) to show on the
display real fishing time and total winding length.
The figure (0 hour, 0.0km) indicates the amount of use.
This displays JIG/PICKUP display.
Revision
1. While “ 0.0 ” is shown in the display, press INVERSE COUNTER
BUTTON and JIG/PICKUP BUTTON simultaneously and hold
for 2 seconds, until the display shows C on left area of the
display.