Daiwa SEABORG-300FB - Manual (Page 19)

17
Functional setting operation
(1. Mode setting display)
How to set the many functions available
Power lever
MODE
BUTTON
MODE
BUTTON
MODE
BUTTON
MODE
BUTTON
Pickup / jigging pattern Jigging pattern (depth display)
Pickup speed Alarm ON.OFF
There are many useful functions in the mode.
1
2
INVERSE COUNTER
BUTTON
and
MODE (JIG/PICKUP)
BUTTON
2.
Press the MODE (JIG/PICKUP) BUTTON to choose a display.
Each press of the MODE BUTTON changes the display to the
next function.
Holding the MODE BUTTON down, rapidly scrolls through the
displays, quickly getting you back to the depth display.
At each mode setting display, the default setting can be retained
by pressing the RESET BUTTON .
While letting out or winding line, the MODE BUTTON cannot be
used to change settings.
Hold down the button for two seconds to indicate the proper
function from an accidental one.
If the MULTI BUTTON is set for
jigging, the pattern selection
mode will first appear.
A
B
Attention
1.
While “ 0.0 ” is shown in the display, press INVERSE COUNTER
BUTTON and JIG/PICKUP BUTTON simultaneously and hold
for 2 seconds, until the display shows C on left area of the
display.