Daiwa SEABORG-300FB - Manual (Page 29)

27
4. In the same manner, set length, waiting time and range.
By pressing the MODE BUTTON (JIG/PICKUP BUTTON)
during the jigging setting display, the display will show depth
and begins jigging.
Pressing and holding the MODE BUTTON will quickly scroll
you back to the depth counter display.
Functional setting operation
(8. Jigging)
Jigging
2
Jigging is an extremely valuable function.
Pickup / jigging
2. Jigging pattern is selected with the power lever.
Jigging setting displays appear in the following order;
Pattern (step) > length (m) > waiting time (sec) > range (m)
3.
Press MODE BUTTON (JIG/PICKUP BUTTON) to show the
next display. Pressing it also locks in the previous setting.
1
3
When jigging is chosen, the pickup function cannot be used.
Jigging pattern
Jigging length
Power lever
MODE BUTTON
MODE BUTTON
MODE BUTTON
MODE
BUTTON
5
Jigging waiting
time
Jigging range
5. After pressing the MODE BUTTON (JIG/PICKUP BUTTON) ,
use the power lever to start jigging.
Jigging speed is controlled with the power lever.
As the jerking starts, indicator blinks.
Pressing the MODE BUTTON (JIG/PICKUP BUTTON) again
stops jigging.
This displays JIG/PICKUP display.
1. While “ 0.0 ” is shown in the display, press INVERSE COUNTER
BUTTON and JIG/PICKUP BUTTON simultaneously and hold
for 2 seconds, until the display shows C on left area of the
display.