Daiwa MARINEPOWER-3000 - Manual (Page 21)

19
Useful functions
Various alarms
Many kinds of information are indicated by audible alarms.
Display light
Backlighting of the display provides easy reading for early morning or night fishing.
Power lever alarm
- Placing the Power lever at MAX or OFF positions evokes an alarm.
Switch alarm
- Each time a button is pressed, a confirming beep is sounded.
Auto stop alarm
Backlighting of the display provides easy reading for early morning
or night fishing.
- As long as the reel is connected to a power source, the display
backlight is on.
Range memory alert
- While lowering your rig back into the strike zone, starting 6 m above the memorized strike depth, an alarm
sounds at two m intervals with a long alarm sounding once the target depth is reached.
(This range memory alarm does not sound unless line has been wound more than 6 m above the memorized
depth.)
-Tells you theat the rig is getting closer to the boat.
-When the water depth is less that 400m, the alarm will sound briefly at 2 m.
intervals after the rig is 8 m. away from the auto stop position.
The alarm will beep when the rig reaches the auto stop position.
- When the water depth is 400 m or more, the alarm will sound briefly at 5 m intervals in the area where the rig is
20 to 10 m away from the auto stop position, and at 2 m intervals after the rig comes 8 m away. It will beep
when the rig reaches the auto stop position.
Excessive voltage alarm
- Should you attach a power source with a voltage higher than the acceptable level, a continuous alarm will
sound. DO NOT operate the reel. Disconnect the power source. Connect a power source with the proper
voltage.