Daiwa MARINEPOWER-3000 - Manual (Page 11)

Display Function
Names of the buttons and the display
About the counter display
The following conditions may make the display difficult to read.
1. When wearing polarized sunglasses.
2. Excessively cold or hot weather, mid-winter (displays surface temperature is below 10 degrees
centigrade) and mid-summer (displays surface temperature is above 60 degrees centigrade).
3. When light strikes the display from certain angles, the displays digits may have shadows. This does not
affect its function.
counter
Depth counter
- It shows the depth from the surface.
Mode display
- Allows you to change the setting of each function.
- The functions that are set to work are shown on the display.
9
Speed indicator
- Indicates (in blinking) winding speed, or winding power,
while the motor is running.
Inverse counter
- Indicates the water depth from the bottom (shelf).
(The display will remain off when the power is first
turned on.)
-The display will appear once the INVERSE COUNTER
BUTTON is pressed.
Lights up when the RESET BUTTON is pressed.
Remains lit while inputing main line length.
Blinks when the power voltage becomes low.
Remains lit while inputing backing line length.