Daiwa MARINEPOWER-3000 - Manual (Page 10)

8
Names of the buttons and the display
RESET BUTTON
This button resets the depth counter to zero.
Make sure to press this button before you start fishing. The
reset depth is used to make the auto stop function work.
(display shows ).
The RESET BUTTON must be quickly pressed 5 seconds. This
prevents accidental resetting. For a total reset, when line has
been broken off, press and hold the button for at least 2
seconds.
To switch the display from the value correction screen to the
total fishing time/total winding length screen, hold down the
INVERSE COUNTER BUTTON for 3 seconds or longer.
INVERSE COUNTER BUTTON
Pressing this button resets the counter in the lower area of the
display.
- It memorizes distance from the bottom, handy for dropping a
bait right back into the strike zone after youʼve been bit.
Display revision indicator
Total hours of
fishing (H)
Total winding
distance (km)
It shows the depth
from the surface.
WINDING DISPLAY LAMP
-Window Display Lamp will remain lit while the reel is in use.
-Window -Display Lamp will blink slowly when the breaker is
ready to operate.
-Window Display Lamp will blink while the breaker is in
operation.